Rubinetterie Bresciane has recently renewed the UkrSERPRO certification for the Ukrainian market. This is a further confirmation of our company's focus in the development of new markets passing through a costant support to the commercial chain.
The reliability of our products goes through this renewal, which confirms the compliance with the quality and safety standards required by our export countries authorities.





We are pleased to announce that Bonomi North America will be exhibiting at the upcoming Valve World Americas Expo & Conference June 20th-21st, 2017 to be held at the George R. Brown Convention Center in Houston, Texas - USA.

At booth # 1611 we will be highlighting a variety of new industrial valve products, including high performance butterfly valves, new Valbia metal housing electric actuators, and new sophisticated Valpres ball control valves. Lastly we will be introducing our Valpres Oil & Gas Division product line.






IVS 2017

At the IVS fair, which will be held from May 24 to 25 in Bergamo, Valpres will present two product lines recently added to its portfolio: the new range of floating ball valves according to the API 608 standard and the High-rangeability control ball valves with crank-arm type actuator and pilot pressure zero bleed steady state system.


With these products, Valpres wants to consolidate its presence on the petrochemical market and the high-pressure gas distribution market, which are sectors for the growth of the company. 

It should also be noted that the introduction of the API 608 line offers the opportunity to integrate Valpres valves with Valbia actuators, in order to exploit the synergies within the Bonomi group.



IVS 2017



ISO 50001

As well as Rubinetterie Bresciane, also Valpres and Valbia have taken and passed the audit for the certification of its energy management system, obtaining the certification in compliance with ISO 50001 norm, released by the entity SQS. This certification is the starting point to improve the energy efficiency of companies, reducing the emission of CO2.
Another achieved goal, to pursue the continuous improvement of our energy performances in terms of efficiency, consumption and use.


ISO 50001



With great pleasure we confirm our presence at the ISH Frankfurt from March 14th till 18th. ISH is one of the most important exhibition in the HVAC and plumbing sector.

We wait for you in the hall 6.0, booth D69 to show you all our product range.




SEATRADE 2017 - U.S.A.

As part of the business development strategy of the marine sector Rubinetterie Bresciane will be attending at the 2017 Seatrade Cruise Global Expo in Fort Lauderdale Florida on March 14th - 16th.
With 700+ Exhibitors from all over the world, the Seatrade Expo is a cruise industry's premier global event where the most influential leaders in the cruise world comes together.

Rubinetterie Bresciane will show its product range specifically suitable for the shipbuilding market, with particular regards to the TURBO INOX and TURBO CUNI press-fitting systems.

Join us at our Booth 521.

SEATRADE 2017 - U.S.A.


ISH 2017 - INDIA

Rubinetterie Bresciane is an Italian leading  manufacturer of brass ball valve.
We are manufacturer also of non return valve, pressure reducing valve, brass fittings for PE, multilayer Pex/Al/Pex pipe either press as well as push system.

It is with great pleasure that we confirm our presence at the ISH Exhibition at India Expo Centre - Greater Noida, from the 23rd to the 25th of February the Indian's leading trade fair for innovative building solutions and technologies.

We look forward to welcoming you at our booth B59 in the Hall 14/15 where we'll be delighted to introduce you our full range of products.


ISH 2017 - INDIA


Also this year Rubinetterie Bresciane Bonomi will take part to the Moscow "AquaTherm" exhibition (07-10 / 02/2017).
AquaTherm is the leading trade fair in Russia and Eastern Europe for the plumbing and HVAC sectors.
Rubinetterie Bresciane will present its product range, as always designed to meet the highest requirements of performance and reliability.

Our staff is waiting for you at stand A504 - HALL 13 - PAD. 3



AHR 2017

Bonomi North America is once again exhibiting at the 2017 AHR Expo, January 30th-February 1st in Las Vegas , Nevada, USA.
The AHR Show is the largest HVAC and commercial plumbing show held annually in North America. This year’s show is expected to break all previous attendance records.
Bonomi North America will be highlighting RBB lead free products, new Valbia “mini” actuated packages, and special timing mechanisms for auto-fill/drain applications.

Please come and visit with us at booth number N7735.


AHR 2017




Valpres has successfully completed the qualification process with Kuwait Oil Company and is now a registered international supplier for on-off and control ball valves  (Registration Number: 12958).

This is an important step towards the creation of new business opportunities  in one of the leading markets of the Oil & Gas industry.





We are pleased to announce our participation in the Valve World 2016 expo, the most important European event of the sector, which will be held in Düsseldorf from November 29 to December 1.

At the Bonomi Group stand (Hall 3, stand BG88), you will find a wide showroom of our main products; it will also be a good chance to present the latest news of the group: the Valpres API 608 valve and the Valbia electric actuator with IP68 protection.

Our staff is waiting for you.





Valbia is pleased to announce that electrical actuators series 86 have successfully obtained the certification for IP68 protection degree and are available for sale, at least initially only upon request, starting from November 2016.


ASPE 2016 - PHOENIX, AR (U.S.A.)

Bonomi North America will be exhibiting at the 2016 ASPE Show in Phoenix Arizona October 31st to November 1st.

The ASPE Show is the largest event for Plumbing design officials in North America. We will be highlighting all of our lead free products including a large assortment of press-fit valves and electrically automated brass ball valves.

Our booth number is #1449 and we welcome everyone to stop by and visit with our corporate professionals.


ASPE 2016 - PHOENIX, AR (U.S.A.)



We have come to the traditional appointment with the H2O biennial trade show taking place in Bologna October 19-21, 2016.
It will be a real pleasure for us to meet you there and to take a look together at the new product lines we studied and manufactured specifically for your market.
We will be open and glad to share opinions about what RB is offering as new.

We look forward to meeting you at our booth C/41-D/42 in Hall 30!







As part of the business development strategy of the oil & gas sector, aimed at opening new potential markets, Valpres achieved Eni qualification for on-off and control ball valves, specifically for the following commodity codes:





Our TURBO IRON series, composed by compression fittings with quick coupling for iron pipes, bulks the range of products supplied by RB and offers you a simple, practical, reliable and guaranteed product.

TURBO IRON compression fittings are suitable for maintenance and reparations of plants realized with iron pipe, for both the private or industrial sector.

Our products range includes three different articles , studied to meet every kind of requirement or plant conditions : a straight male quick-assembling compression fitting, a straight female quick-assembling compression fitting and a double loop quick-assembling compression fitting.

A deep analysis of the components which constitute RB's TURBO IRON fittings grants not only a quick and efficient installation but it also helps to simplify considerably the work of the plumber, adding to our range of compression fittings a new and efficient product.




The 27th edition of the SMM exhibtion, main international window for the maritime industry, is being held in Hamburg from 6th to 9th September. Rubinetterie Bresciane Bonomi S.p.A. confirms the presence with its own exhibition space dedicated to its piping systems Turbo CuNi and Turbo Inox specifically developed and certified for the shipbuilding applications.

PAD. A2 - STAND 109




SMM 2016




Valpres ball valves (side entry bolted body, welded body and top entry) has been certified by TÜV Rheinland according to IEC 61508-1÷7:2010 SIL (Safety Integrity Level) 3.
Such certification strengthen Valpres role in the market segment of critical valves such as BDV (Blowdown Valves), SDV (Shutdown Valves), ESDV (Emergency Shutdown Valves) e HIPPS (High Integrity Pressure Protection Systems), that is strategic to Valpres growth in the years to come.



Valpres is now registered in Achilles as a supplier of ball valves (manual, on-off and control ball) having received the certification by Repro, FPAL, JQS and UVDB.
Valpres installed base in Northern and Southern Europe is notable and our presence on the Achilles databases will enable buyers in the whole continent to benefit of our high quality valves.
For further info please visit us at



Rubinetterie Bresciane presents the new PRESSURE REDUCER art.300300, very compact with high performance.
The project nominal pressure is 16 bar and the adjustment of the pressure downstream varies from 1.5 to 6 bar. We can extract the inner cartridge for the maintenance and the cleaning of the stainless steel filter by simply unscrewing the cap black plastic. Suitable for use with water and air, the new pressure reducer responds to the requirements of the EN 1567.
The size currently available are DN 10 and DN 15 and DN 20



Rubinetterie Bresciane announces its presence at the International event SEAFUTURE & MARITIME TECHNOLOGIES 2016 concerning the most up-to-date technologies for the naval sector, with particular reference to the military ones.

The exhibition, that will be held inside the historical Navy Yard in La Spezia, make a name of itself as a business platform and technical-scientific exchange between the big players of sea-economy, Navies (both the Italian and the foreign ones) and the enterprises world.

In its exhibition space Rubinetterie Bresciane will display the TURBO INOX and TURBO CUNI systems, recently tested also to the most strict requirements for shock and vibrations related to the applications on board of warships.



VALPRES releases VALPSIZE 2.0, software for sizing and selection of its control valves. Version 2.0 includes an improved interface and new features including the datasheets creation and the possibility to import/export projects. The user can now size Floating Vball valves and Floating and Trunnion mounted cage ball valves (VP1-L, VP1-G).
Download now Valpsize


Rubinetterie Bresciane presents the new colored covers for handles and T-handles. They are extremely useful to distinguish cold from hot water lines. They are available both in red and blue colors with different sizes in order to fit our wide range of products.


IFH 2016

Auch in diesem Jahr stellt Rubinetterie Bresciane auf der IFH/Intherm Messe in Nürnberg aus (05.04 - 08.04.). Es handelt sich um relevanteste Fachmesse für Sanitär, Heizung und Klima im Süddeutschem Raum. Rund 700 Aussteller werden Ihre Produkte über vier Tage dem Fachhandel sowie dem Fachhandwerk präsentieren. 

Rubinetterie Bresciane wird sein breiten Spektrum an bewährten Kugelhähne ausstellen. Ferner werden die selbst hergestellte Presfittingsysteme der Turbo Serie im Fokus stehen.

Unsere Mitarbeiter freuen sich auf Ihren Besuch ! Stand 7 - Pad. 7.107

IFH 2016



Rubinetterie Bresciane Bonomi S.p.A. is going to participate in the MOSTRA CONVEGNO EXPOCOMFORT 2016 from March 15th to 18th , at Pad. 18 booth A41 D42.
We will be glad to welcome you at our booth and show you our interesting new products.



The EAC certification replaces the previous GOST declaration, that is no longer valid for the products subject to the new Technical Regulations TR TC, and guarantees the free export of our complete range of products in the countries of the Customs Union Eurasian (Russia, Belarus and Kazakistan) by reducing costs and paperwork.
The EAC declaration of conformity certifies the full correspondence of Rubinetterie Bresciane fittings with the performance requirements of Technical Regulations TR TC 0032 "On the safety equipment of high pressure" and TR TC 010 " On safety of machines and equipment". As regards steel press fittings TURBO STEEL, STAINLESS TURBO and the brass series for multilayer tube TURBO PRESS and  TURBO PUSH for heating, cooling and drinking water is still valid the declaration GOST as there are no Technical Regulations specific to this types of product.


Also this year Rubinetterie Bresciane Bonomi S.p.A. is going to participate to the AquaTherm exhibition in Moscow (02-05/02/2015).
AquaTherm Moscow is the leading event in Russia and Eastern Europe in the industry of heating, water supply, sanitary technologies, air-conditioning and ventilation.
Last year’s show had an attendance of over 27,000 visitors from over 30 counties. We are expecting the same for this year. There will be over 700 exhibitors as well.
We will be highlighting our range of products, redesigned and certified in order to 100% comply with the Russian market needs.

Our staff will be waiting for you at the booth nr. A505


AHR 2016

AHR 2016

Bonomi North America is once again exhibiting at the 2016 AHR Expo, January 25th -27th in Orlando Florida, USA.
Last year’s show held in Chicago had an attendance of over 60,000 visitors from over 60 counties. We are expecting the same for this year’s Orlando venue. There will be over 2100 exhibitors as well. We will be highlighting our RBB lead free brass products, and our new Valbia VBM series metal housing electric actuated packages.

Our booth number is 5619



AHR 2016


NUOVI CATALOGHI 2016   Now online the new 2016 catalogues: Rubinetterie Bresciane (CAT.160), Valpres (CAT.161) and Valbia (CAT.162) and the new Rubinetterie Bresciane's technical instruction 158 .




  Within the frameworks of the co-operation agreement between Rubinetterie Bresciane and Fincantieri, giant firm of the world shipbuilding industry, the Turbo CuNi system has recently debuted on board of cruise ships.

Turbo CuNi has been indeed applied for the ambitious and innovative project of the MSC Company so called “Rinascimento”, consisted of 4 cruise ships extension (MSC Armonia, MSC Lirica, MSC Sinfonia e MSC Opera), nearing completion at the Palermo shipyard.

In parallel the supply of Turbo CuNi system for the realization of piping lines on board of the Seven Seas Explorer is under way. About this ship, under construction at the Genova-Sestri shipyard, has been told that it will be the most luxurious cruise ship ever built and it will be equipped with the latest technologies also with regards to the safety and environmental protection.  


EIOM 2015

On 25 november we'll be waiting for you in Milan, during the mcT Petrochemical - Exhibition and Conference Technologies for Petrochemical Industry, position 79 (Crowne Plaza Hotel - Via K. Adenauer, 3 - 20097 - San Donato Milanese).

For a long time Valpres operates in the Oil and Gas sector(market) and has developed, even for the downstream sector, ball valves API 6D and API 608 for temperatures from -196 °C to +450 °C. These valves, which are particularly efficient in case of actuation, are offered in both version: interception and adjustment (regulation).They are available in various materials and design, in according with customer specifications. In particular the regulating valves, covered by a patent, are an innovative and effective solution where a project needs small spaces, weights and costs containment (are a project needed).
EIOM 2015


It is with great pleasure that we confirm our presence at the ENES Exhibition in Mosca, from November 19 till 21, 2015, to show our solutions for Issues related to enhancement of productivity and consumption of energy resources etc. in the Power & Renewable Energy industry.

Visit us at stand Italy 2 - B06.

ENES 2015


Rubinetterie Bresciane has certified its multi-layer piping system for hot and cold water installations inside buildings, according to the European standard EN ISO 21003, at the prestigious German certification body DVGW. The system consists of brass fittings:

- TURBO PRESS, press fittings in nominal diameters 16x2 -20x2 - 26x3 - 32x3, made on brass CW617N and equipped with rubber perox EPDM O-ring seal;

- TURBO PUSH, fittings, assembled by a simple manual pressure, in nominal diameters 16x2 -20x2 - 26x3, composed by brass CW617N, equipped with rubber perox EPDM O-ring seal and a stainless steel ring preventing the pipe to get out;

and the multi-layer pipes in the following categories:

- PE-RT II /Al/ PE-RT II, composed by an inner layer of a non-cross linked polyethylene (PE-RT II), an intermediate 99.9% aluminum sheet welded longitudinally head-to-head, from an external layer of non-cross linked polyethylene (PE-RT II), joined together by an adhesive;

- PE-Xc/Al/PE-Xb, compounds of an inner layer of polyethylene cross linked with radiation of electrons (PE-Xc), an intermediate 99.9% aluminum sheet welded longitudinally head-to-head, with an external layer of cross linked polyethylene to xylanes (PE-Xb), joined together by an adhesive.

The systems are able to operate to the rated operating pressure of 10 bar, in line with the applicable regulations, in the range of temperatures between 0 °C and 95 °C. The supply and installation shall mean within holes or track or on brackets including surcharges for cuts, scraps, fittings and any other charges act to make the installation in a professional way. This certification is in addition to that already obtained from the same German institution, according to the DVGW W 534 worksheet.



Rubinetterie Bresciane obtained the certification from the Austrian OVGW for use of press fittings in stainless steel of the serie TURBO INOX with drinking water . This certification was issued by the authorised laboratory TGM according to the standard PW 402/2011 and extend the already wide range of approvals obtained from the major European Authority such as DVGW, Rina, DNV and many more.


Wir stellen auf der Messe MCE ASIA 2015 vom 02 bis 04 September, Halle C - Standplatz E10 an dem "Conventional Centre Marina Bay Sands in Singapur aus.

Wir würden uns freuen, Sie an unserem Stand Willkommen zu heißen, wo wir Ihnen unsere neuesten, zuverlässigen und innovativen Produkte vorstellen zu können.
Hier ist es eine wichtige Möglichkeit für ein Gespräch, um über eine Verbesserung, über die Markdynamik und die Möglichkeit der zukünftigen Entwicklung zu sprechen.


          MCE ASIA 2015          


Valpres extends its range of underground steel ball gas valves up to DN 300. The conformity has been tested in according with UNI 9734 and EN 13774 with type test carried out by a certificate third parties laboratory. The temperature range is -10 °C + 60 °C and the maximum working pressure is 5 bar.


Valpres e Valbia will be present at Achema 2015 exhibition - Frankfurt, 15th to19th June.
Valpres will present the control ball valve series fgv1 trunnion and floating, and the cryogenic ball valve series  690000 / 790000 trunnion and floating.

Valbia will present its product range, very well known as rack&pinion pneumatic actuator, now produced in far more than 2 million pieces and installed all over the world in many different applications. Beside standard version with body in hard anodized Aluminum, we will show actuators with PTFE surface coating, Nickel plating or Epoxy coating suitable for installation in aggressive environment. The version in AISI 316 Stainless Steel will also be shown. The torque range goes from 8 to 5059 Nm @5,5 bar with 15 models double acting and 14 spring return. All of them are ATEX CE ExII2G/D-CT6 and also SIL2 certified.

Also the more recently introduced range of Electric Actuators (quarter turn) will be shown, with Technopolymer or Aluminum enclosure, to make them suitable for installation in different environments. The range has torque output from 15 to 350 Nm. The voltage can be 12VDC or 24V AC/DC, 100V and 240V AC. The entire range is CE and UL certified. For both ranges of actuators a full package of accessories is available.

  Our booth will be in HALL 8.0, BOOTH F9.


WGC 2015

From Jun 2nd to June 5th 2015 we will be exhibiting at World Gas Conference (WGC Paris 2015). It is the most important event during the three years of activity of IGU (International Gas Union) and includes a section dedicated to conventions related to the themes of gas supply, and an exposition area with the most important companies of the sector. With the occasion, in addition to our complete range of gas valves, we will present a special control ball valve of 16" dedicated to the Oil&Gas sector.

Our booth will be in HALL 1, STAND L61.


IVS 2015

In this important occasion - IVS Bergamo, Italy, from 27th to 28th May 2015 - , Valpres will present the control ball valve series fgv1 trunnion and floating, and the cryogenic ball valve series  690000 / 790000 trunnion and floating. Valbia will present the electric actuator series 86 with aluminum case.

We will be waiting you for a complete presentation of our products at our booth 34-72 in the Hall A.



Im April 2015 hat Rubinetterie Bresciane Bonomi den Audit für die Zertifizierung des Energiemanagementsystems bestanden und somit die Zertifizierung gemäß der Norm ISO 50001 durch die SQS Zertifizierungsstelle erhalten. Diese Zertifizierung ist der Anfangspunkt, um die Energieeffizienz zu verbessern, die Rentabilität zu erhöhen und die die CO2-Emissionen zu reduzieren und somit sich dem staendig entwickelnden Klimawandel anzupassen.


Rubinetterie Bresciane renewed voluntary Russian certification GOST concerning steel press fittings TURBO STEEL, TURBO INOX and brass series for multilayer pipe TURBO PRESS and TURBO PUSH for heating , cooling and drinking water. We are certifying brass ball valves and Valpres steel ones according to new technical regulations (TR TC) , which came into force this year in the EurAsEC Customs Union , needed to export products in Russia , Belarus and Kazakhstan.


Rubinetterie Bresciane has obtained the status of Authorized Economic Operator FULL - AEOF - in its most complete version: customs simplifications / security. Be a safe market operator certifies a situation of reliability against the customs authorities. This status allows the simplification of customs procedures and ensure the security strengthening all along the international supply chain. The partnership between customs and factories has been wanted by the World Customs Organization (WCO1) for the development of trade. It will speed the traffic and increase the security levels of the marketed products.

  Read the news PDF



In addition to the many product certifications related to the wide range of Rubinetterie Bresciane valves, reflecting the accurate attention to the current standards and the product’s quality, it is added  the approval by the main companies of natural gas distribution in Italy and abroad, according to its own internal specifications, of the brackets for gas meter G4 and G6 with center distance  110mm and 250mm respectively. Were also approved the flanged steel valves "SPLIT BODY" and the underground valves with elonged stem series  “INTERGAS”. This steel valves are produced by the partner Valpres.

Brakets: brass ball valves for gas shut ≤ DN 50 ( 2 " ) for gas meter G4 and G6. Approved size : 1 " x 1 " 1/4 center distance from 110mm to 250mm for the G4 and G6; handle: aluminum lever and sealable cap.
Underground valves: shut-off steel valves for gas pipelines with a maximum operating pressure of 5 bar with elonged stem. Approved size from DN 25 to DN 100 full bore.
Split body: shut-off steel valves for gas pipelines with maximum operating pressure of 5 bar. Approved size from DN 25 to DN 65 full bore.    

ISH 2015

Dear ladies and gentlemen

it is with great pleasure that we confirm our presence at the ISH Exhibition in Frankfurt, from March 10 till 14, 2015 the world's leading trade fair for innovative building solutions and technologies.

We look forward to welcoming you at our booth D88 in the Hall 6.0 where we'll be delighted to introduce you our full range of products.

See you in Frankfurt!





Rubinetterie Bresciane has renewed the WRAS (Water Regulations Advisory Scheme) certification, released by laboratory autorized NSF-WRc. The purpose of WRAS is to contribute to the protection of public health by preventing contamination of public water supplies and encouraging the efficient use of water through a rigorous analysis on the components of the materials and the execution of strict mechanical and release test. The certified series are 1618 and 1628, ball valves with copper pipe end connections.



Now online the new Bonomi Group depliant!

Download it here: DEPLIANT


will take part at the exhibition Aquatherm which will be held in Moscow from 3 to 6 February at Krokus Center.
This is the most important exhibition in the  HVAC sector in the Russian Federation.

We will show as Rubinetterie Bresciane our brass ball valves and the supply program of press and push brass fittings for multilayer and PE pipes also we will present our carbon steel, stainless steel and CuproNichel press fittings.

As Valpres and Valbia we will show industrial process valves assembled with our Pneumatic and Electric actuators.

Come see us: pav. 13, stand A504.


AHR 2015

Bonomi North America
is exhibiting at the 2015 AHR Show in Chicago at the McCormick Place on January 26th-28th. This is the largest HVAC Marketplace Show in North America bringing together over 2000 exhibitors, and over 40,000 visitors.

We will be highlighting our Rubinetterie Bresciane lead free ball & check valves

our Valpres direct mount and true wafer flanged end  ball valves

and our new Valbia metal enclosure electric actuators.

Come see us in booth # 2656.








Rubinetterie Bresciane has further extended the suitable applications, in the shipbuilding sector, for its Turbo Inox and Turbo CuNi products after the specific fire test carried out at the R.I.NA. laboratory in Genoa.

The new test, carried out in compliance with the ISO 19921:2005(E) and ISO 19922:2005(E), satisfactory with regards to the unified requirement IACS UR/P.2, has verified the suitability of the a.m. products for fire-fighting systems in dry conditions on board and  for their whole size range too.  



Rubinetterie Bresciane has developed a new check valve with solder connection for American market. The material is lead free brass CW510L to comply with regulations to products in contact with drinking water. The new valve is characterized by a temperature range from 10°F to 270°F and operating pressure of 400 PSI. Connections meet the construction requirements of the American standard ANSI B 16:18.

The new check valve 100712LF has already been approved by UL in accordance to NSF/ANSI 372.



The Bonomi Group will be present at the most important European event of the year relevant to the valve market, the Valve World Exhibition, held in Dusseldorf on December 2-4.

We look forward to welcoming you at our booth (5G39 in Hall 5) where we will have the opportunity to show you the latest news about the oil and gas products as well as cryogenic and control ball valves.

You will also find an extensive portfolio of some of Valpres and Valbia's  best and most innovative products for industrial valves automation.

It will be for us an important opportunity for discussion and improvement, to talk about your needs, the dynamics of the market and the possibility of future development.

For this reason we invite you to visit us and we expect you to be as numerous as possible.



Rubinetterie Bresciane has renewed the WRAS (Water Regulations Advisory Scheme) certification, released by laboratory autorized NSF-WRc. The purpose of WRAS is to contribute to the protection of public health by preventing contamination of public water supplies and encouraging the efficient use of water through a rigorous analysis on the components of the materials and the execution of strict mechanical and release test. The certified series are 1600 and 1700.
Il Bonomi Group prosegue il proprio percorso di qualità per garantire sempre il meglio.


presents the new steel ball valve for natural gas installation underground level, in according to UNI 9734. The elonged stem is characterized by an IP 67 seal and the possibility to reduce the height also when the valves is just placed.
The cut at the estabilished height and the assembly of the particulars that composo the upper cup is made in a simple and univocal system keeping the IP 67 seal.


Some pictures from the H2O exhibition, held last week in Bologna, Italy.
Rubinetterie Bresciane thanks all who joined this event.



Rubinetterie Bresciane Bonomi confirms its attendance at the Accadueo Expo taking place in Bologna Fiere on October 22 - 24. This show is the main meeting point for the whole national hydraulic distribution sector. Lectures and technical workshops during the event are an important debate opportunity that fosters constant improvement in the main items of the business.
The technical and commercial staff from Rubinetterie Bresciane will give their contribution during the lecture "Le tecnologie: rassegna di best practices", taking place at Sala Aposa on October 24th, from 10.00 am to 12.00 pm.

You will find us at Hall 30, Booth C93.

We'll introduce the valve with lowest flow rate locking system for defaulting users. This device is suitable for the whole BUBBLE-SFER Series with T-handle in tecno-polymer material.

In this occasion, we'll show the patented INTERGAS valve for underground installation with adjustable stem extension for GAS pipelines too. Very easy system for adjusting the length of the stem extension to be made even on site.
The new bracket, with eccentric adapters, for gas meters G10 and G16 we'll be displayed also.


Rubinetterie Bresciane Bonomi S.p.A. reconfirms its attendance as exhibitor on the leading international maritime trade fair, remarking once more its continuous effort for the development of innovative products dedicated to the most qualified and high standard technical applications in the plumbing field.





Rubinetterie Bresciane has renewed the ACS certification, issued by Carso LSEHL (laboratory autorized by French Department of Health), which allows to tell if either a material or an object can be in contact with drinking water by means of a rigorous analysis of the material components and strict tests of release. This system  meets the requirements of the French decree of May 29th, 1997 and its following updates. The certified series are 1600, 1700, 1800, 2300, 2700, the whole  water series 2000 and the brass pressfittings TURBORING 560000 - 570000. This renewal joins the already existing ACS certifications concerning the 1500 series and the EUROFLY series 600000.
Bonomi Group keeps following the quality path to always guarantee the best.


The new project was born from the increasing sensitivity by operators of gas networks in respect of the UNI 9036 , regarding the support of the gas meter G10 and G16 .

Rubinetterie Bresciane decided to respond to this new demand by designing a new bracket composed by the brass ball valve , fixing plate, steel cross beam, center distance 280mm, with threaded union tail able to sustain the counter without creating excessive tension on the threaded connections .

The full bore ball valve 1"1/2 x 2" is characterized by the security lock , with the female connection in according to the UNI EN 10226 and connection to the flow meter threaded ISO 228. The valve can also be supplied in a version with aluminum handle or with sealable cap .

The irons group is constituted by a steel beam with a distance of 280mm , union tail without longitudinal weld equipped with an outlet pressure cap 1/4 " sealable . The fixing plate is formed by two plates to allow adjustment and be flexible for different applications ( from 150mm to 220mm ).

Furthermore Rubinetterie Bresciane has introduced, in his production, the eccentrics 250mm-280mm.
The new eccentric adapter is made to meet the need to replace gas meters in preexisting systems. Its use can resolve the various situations that a technician can see. They are installed to adapt the gas meters with an axel spacing of 280mm to the preexisting system with an 250mm one. They can be used also to install a new gas meter model that has a different distance to the wall. This new eccentric adapter is made of an unique brass block and the part mounted on the exit side of the gas meter has a 1/8" pressure measurement connection with a sealable cap.
The available sizes are: 2” x 2” - 1” 1/4 x 2”

These new products increases the range of Rubinetterie Bresciane products to respond to new market demands.


As part of the development of VALPRES' control ball valves (trunnion mounted and floating ball), the ValpSize Sizing software will be available shortly. It will allow to size and optimize the choice of control valves for comressible and uncompressible fluids.
This will include Floating ball valvs up to 6" (also in the V-ball design) and Trunnion ball valves up to 24".

Come back soon for more news!


The new project was born from the increasing sensitivity by operators of gas networks in respect of the UNI 9036 , regarding the support of the gas meter G10 and G16 .

Rubinetterie Bresciane decided to respond to this new demand by designing a new bracket composed by the brass ball valve , fixing plate, steel cross beam, center distance 280mm, with threaded union tail able to sustain the counter without creating excessive tension on the threaded connections .

The full bore ball valve 1"1/2 x 2" is characterized by the security lock , with the female connection in according to the UNI EN 10226 and connection to the flow meter threaded ISO 228. The valve can also be supplied in a version with aluminum handle or with sealable cap .

The irons group is constituted by a steel beam with a distance of 280mm , union tail without longitudinal weld equipped with an outlet pressure cap 1/4 " sealable . The fixing plate is formed by two plates to allow adjustment and be flexible for different applications ( from 150mm to 220mm ).

The new bracket increases the range of Rubinetterie Bresciane products to respond to new market demands.


Angle ball valve for manifolds right/left, with black frontside aluminium butterfly, red and blue washer for indentifying the flow hot/cold.

The new 4644, valve for manifold model COMPACT series EXPO-SFER is an extremely versatile and compact product. Thanks to its characteristics, it makes the positioning easy and functional inside the inspectionable manifolds' boxes, nowadays always smaller for aesthetics reasons.
The valve can be installed either on the right and on the left position, thanks to the presence of a double pipe union connection. The extreme versatility is given by the fact that the valve has a pipe union and a plug which can be placed according to the needs. A colourful aluminium washer, on one side blue and on the other red, inserted under the die which stops the butterfly, indicates visually where the transit of hot or cold water.


The conformation of the valve COMPACT allows also a central installation (with two pipe union connections and therefore two manifolds), for a uniform and balanced distribution of the fluids in the manifolds.


IFH 2014: 8.-11. April, Messezentrum Nürnberg








Wir austellen auf  MOSTRA CONVEGNO EXPOCOMFORT 2012: 18-21 marz, Pad.18 / stand A41-42 C47-48 D42, Fiera Milano-Rho.

Nach Erhalt der Zulassung für Anwendungen im Schiffsbau von allen wichtigen Klassifizierungsgesellschaften und der DVGW-Zertifizierung in Bezug auf das System für den Einsatz von Gasanwendungen, setzt Rubinetterie Bresciane seine Entwicklung, Erweiterung und Verbesserung der Presssysteme aus dem Lieferprogramm, Turbo-Steel, Turbo Inox-Gas, Turbo Inox und Turbo CuNi fort.
Zu den jüngsten Erweiterungen zählen:
Turbo Inox
Durchgangsverschraubung Flachdichtend mit AG
Turbo Steel / Turbo Inox / Turbo Inox Gas
Endkappe ohne Entlüftung  (Auch bereits mit Entlüftung für das Turbo Steel und Inox System)- 
Turbo Inox / Turbo CuNi
Bogen I/I 15 bis 90 Grad
Turbo Inox / Turbo CuNi
Übergangsflansch mit Muffe PN6
Turbo Inox / Turbo CuNi
Flanschübergang für losen Flansch mit Einsteckend PN6

Mit der Umsetzung neuer Produktionsprozesse haben wir Rubinetterie Bresciane alle Presssysteme für Metallrohre, den gesamte Produktionsbereich der Bogen  90 ° und 45 °, mit deutlich reduzierten Baulängen (zwischen 10% und 20 %) erneuert. Der begrenzte Raum der früheren Ausführung (mit Biegeradien R = 1,2 D für das gesamte Programm von Bogen) sind somit weiter verbessert  zum Nutzen der endgültigen Qualität der Installation optimiert worden.


Wir austellen auf AHR, 21.-23.01.2014, stand #8030 - New York City -
The Word's largest HVACR Marketplace.




Pressure variations of the water supply do require a stabilization while entering the plant. This operation does protect the lifetime of the single parts of the pipeline, reduces the water noise and moreover does generate a significant saving of water. By reducing the line pressure from 6 to 3 bar, a saving up to 30% water is reached. Further, water supply lines do show huge pressure variations between day and night time. Due to a limited request of water during night time, water pressure tends to raise significantly. It's therefore strongly recommended to install devices which may stabilize the downstream pressure in case of pressure variation on the upstream side. At this purpose Rubinetterie Bresciane is glad to introduce the new range of EURO pressure reducing valves.


Rubinetterie Bresciane bietet ein vollständiges Programm von Kugelhähnen und Systemen für Trinkwasserinstallationen vor, für und nach den Wasswerzähler. Die Konstruktionseigenschaft dieser Armaturen ermöglicht deren Einsatz für Trinkwasseranwendung laut den italienischen und europäischen Vorschriften.
• Der Kugelhahn ist nicht vernickelt und entspricht somit den neuen europäischen und amerikanischen Vorschriften.
• Die Armatur ist zugelassen durch die namhaftesten internationalen Zulassungsinstitute.


Rubinetterie Bresciane introduces the new and the most complete range of gas ball valves available on the market, to be installed after the meter allowing the periodically inspection of the systems on the down-stream side of the meter.
They are available with:
security lock.

Anti-tampering connection for pressure measurement.

More informations  HERE


Rubinetterie Bresciane, that always cares about the safety of domestic gas installations, presents: the brand new FIDO-CASA.
FIDO-CASA has all the technical and aestethic requirements demanded in modern installations.
• Beauty and design
• Easy intuitive manouver
• Easy mounting
• Matching with all kinds of installation systems

Because of its small dimensions, similar to covers of electric switches, and thank to its various options, the new FIDO-CASA can fit perfectly in all constructions.

More informations  HERE


Rubinetterie Bresciane stellt die Erweiterung der Sanitärprodukte zur Ergänzung der Verteilerkombination Artikel 59300 vor.

Um diesen Bereich zu vervollständigen wurden die einzelnen Komponenten mit und ohne Absperrventilen konstruiert, somit bieten wir die Möglichkeit jede Art von Verteilern schnell und einfach zusammen zu stellen.


Rubinetterie Bresciane bietet durch die hohe Flexibilität eine vielseitige Lösung für den Handel sowie auch für das Handwerk.

Details können Sie in unserer Brochüre ENTNEHMEN


Wir stellen bei der MECSPE 2013, vom 21. bis 23. März in Parma aus, Halle 4 Stand C16.



ISH 2013

Wir stellen bei der  ISH 2013, vom 12 bis 16  März, Stand D88 Halle 6 - Frankfurt.




Wir stellen bei der Valve World 2012, vom 27. bis 29. November in Düsseldorf aus, Halle 03 Stand Nr. 3B01.




SMM 2012

Wir austellen auf SSM 2012, 04.-07.09.2012, Pad. B3.OG / stand 126 - Hamburg -






Diese freie Anwendung ermöglicht Ihnen, in unsere Kataloge hineinzuschauen und Informationen betreffend unseres Konzerns zu erhalten.


  • Go to Katalog Rubinetterie Bresciane
  • Go to Katalog Valpres
  • Go to Katalog Valbia
  • Go to Katalog Bonomi North America
  • Go to News
  • Go to Videos und Gallery
  • Go to Über uns
  • Go to Kontakte
  • Go to Unsere Websites





Wir austellen auf  ACHEMA, 18.-22.06.2012 , Pad.8 / stand E15, Frankfurt am Main - Deutschland.


Valves of BUBBLE-UFR series are the right solution for recovering most of the apparent leakags every waterworks suffer from. This patented system guarantees a correct reading of the water meters, even at low flow rates. Hence it allows also the counting of leakage, throttling etc. that normally occur inside the houses.